I get to test (and play with) pretty much every high-end woofer and component set available in car audio. I guess this gives me a unique perspective, but mostly it leaves me bored with much of what I see. When the huge box arrived totaling some 35 pounds, supposedly containing a new component set from Focal, the last thing I was, was bored. When I opened the box I saw the strikingly beautiful brushed aluminum flight case that enclosed the system. Upon opening it, I started looking at the components themselves and the crossover.I was even less bored. In fact, I felt that very rare feeling of excitement over something new and very cool.
I guess that someone crazy at Focal said, "What if we build the very best component parts and put them with a completely variable crossover? Oh yeah, and cost is no object." That has to be what happened, because that is what arrived.
With the Utopia Be line, Focal has put together a really flexible range of component parts that can be mixed and matched with their crossovers to fit pretty much any high-end car audio situation. (You are not going to find these on the www.focal-america.com site. You need to go to www.focal.tm.fr to check it out.) They are sold as systems No. 5, No. 6 and No. 7, which are basically a 5. 2-way, a 6-1/2" 2-way and a 6-1/2" 3-way with a 3" mid. (All use the same tweeter.)
The set that showed up on my doorstep was the No. 6, which will probably be the most popular. It is comprised of a 25mm Beryllium Tweeter (Be is the atomic symbol for beryllium), a 6 1/2. neo magnet midbass and the (gasp) extremely versatile Crossblock crossover. These components are also the heart of the JMLab, ultra-high-end home audio products that cost up to $80,000 for the flagship "Grand Utopia Be".
The tweeter is pretty much perfect. Beryllium is the ideal diaphragm material. It is 0.5 times less dense than titanium and 1.5 times less dense than aluminum, but is 3 and 5 times stiffer, respectively. For domes of identical mass, beryllium is 7 times more rigid than one made of titanium or aluminum, and the velocity of sound waves traveling through it is 3 and 2.5 times faster than through, respectively, titanium or aluminum. It.s also rare, expensive, hard to form into a dome shape and produces highly toxic fumes when it is machined or abraded. There are serious disclaimers in the instruction manuals about what to do if you damage a tweeter. (This brings up the very real possibility of a serious problem if you car is ever involved in an accident.)
The diaphragm is inverted unlike most tweeters and is coupled to the frame with a wide flat edge. This combination gives a very extended top end with little or no diffraction artifacts that exist in virtually every other tweeter. You will see the graphs later in the article that go out to 40kHz. This is pretty much the limit of my test system. It appears that at least on-axis it goes much higher than this with no breakup modes.
The woofer is equally advanced with a "W" cone that is described on their website as follows:
"The "W" cone uses two very fine tissues of woven glass that are lighter and thinner than aramid fibers. In addition, the molecular bond between the foam and the glass tissue is far superior to that of the aramid fibers. This results in a cone structure which is mechanically more stable and with superior stiffness. This construction allows us to further optimize the transmission speed of the sound wave in the cone. This new construction process allows the amount of internal damping in the structure to be very accurately controlled by varying the thickness of the foam: the thicker the foam, the higher the damping factor. The relationship between the thickness of the glass tissues and the foam core allows us to finely optimize the cone structure depending on the particular application and the frequency area to reproduce. The .W. cone produces an extremely transparent and neutral sound free from coloration and distortions normally associated with loudspeakers. Its only limitation, the price; more than 10 times the price of a quality paper cone."
Did you catch that last line, the one about price? I haven’t seen the prices on these yet but my guess is, if you have to ask—well, you know the rest.
Finally we come to the crossover. I have tested crossovers with lots of flexibility. I have tested crossovers with really high-grade parts. I have never tested, seen or imagined a crossover that is this flexible or uses this many absolutely highest-grade available parts. Here again from their website:
"It (the Crossblock) is a fantastic tool, which helps to precisely adapt the crossover to the acoustical characteristics of the car in order to integrate its acoustics into the whole sound system … Instead of using more than 10 coils we designed a single Multicoil air core inductor which is in essence, thanks to multiple connection points within the winding, 10 coils wound at once into one. This allowed us to use a very large gauge copper wire, which guarantees a very low insertion loss. The same way, instead of using a multitude of capacitors, we designed a Multicap capacitor, which is nothing else but a number of different-value capacitors wound together as one. These Multicaps are indeed high-efficiency metallized polypropylene capacitors made with the strictest specifications by SCR. We also use high-quality switches with very low insertion loss, and we even went as far as wiring in parallel some of the terminals of the switch."
In short, they built a crossover (that’s as big as some amps), that uses the absolute best parts, has 4,480 possible settings and can adjust the frequency response to perfectly match your car. Of course, as you will see later, adjusting the crossover is not for an amateur or even a moderate level car audio shop. These should really only be installed by a shop with test equipment like multi-microphone RTAs, which can make the most of the product. How much does this cost? Again, if you have to ask.
On to the testing.
Parameter Testing[My testing setup has changed dramatically with the addition of the Klippel Distortion Analyzer. I still use the ACO Pacific 1/4. microphone" lab amplifier and IEC baffle; however, all of the testing is done through the Klippel now. It is the "be all, end all" analysis tool for the loudspeaker engineer. The Klippel is revolutionizing loudspeaker design in virtually every application. Check it out at www.klippel.de.
Klippel testing has given us a new way to look at a speaker's linearity under power. The non linear Motor Force (BL[x]) and Compliance (Cms[x]) are graphical representations of what the speaker is doing while it is playing. They tell us if everything is balanced and working together.
Both of these curves should be centered on the X(mm) 0 line and have essentially the same shape on either side of this point. The dashed lines on the graphs are the mirrors of the actual test and make it easy to see if the curves match the ideal.]
My testing starts with "Small Signal Parameters" for the woofer.
If you have been following the reviews for the last few years, you know that I actually measure "Small Signal" at a more realistic level than traditional tests. Small signal for the Klippel system can be measured as the highest voltage before the speaker starts to become nonlinear. For the "Utopia Be 6 W2" woofer this was at 2 watts, which is a pretty good starting point considering the very high efficiency of the speaker. The key parameters are listed in the Small Signal chart.
Parameter Small signal 2 Watts
Re (Ohms) 2.91
Fs (Hz.) 42.6
Vas (l) 21.05
Cms (mm/N) 0.85
Efficiency at 2.83 volts (dB) 91.5
So how do these stack up? Good, straight down the line. These speakers are goi
ng to be used with a subwoofer so the relatively low Q / Low Fo is not an issue. The stand-out parameter is the efficiency. The high-tech cone certainly shows.
The Bl(x) (Graph 1) curve for the woofer isn.t perfect, with a shift of about 1.5mm. The question is why is it biased on such a high-end speaker and, more importantly, will it affect the performance? The Cms(x) (Graph 2) curve shows the same bias, in the same direction. This typically means the suspension is forcing the coil out of position. I checked the speaker visually and there is a slight dip in the spider, which is probably the culprit. The good news is that although the curve doesn.t look perfect, the resulting distortion will probably not be audible, especially when used with a subwoofer and active crossover.
The Bl(x) and Cms(x) curves can also be used to predict the maximum excursion for the speaker (Xmax). It is defined by Klippel as the point at which the compliance or Bl nonlinearities create 10% harmonic or intermodulation distortion. This happens when the Bl has dropped to 82% of its x=0 value (XBl) or Cms has dropped to 75% (Xc). For the Focal woofer the XBl point is 3.7 mm and the Xc point is 4.4mm. My guess is that if the suspension bias was corrected these numbers would be closer to the 4.5mm listed in the specifications. Again, with an active crossover and subwoofer, these are still good numbers, especially if the frequency response is stellar.
This is where the story starts to get really interesting. I started by measuring the speakers without crossover to see what the exotic materials were bringing to the table. Graph 3 shows the woofer and tweeter response on-axis—killer high-end on the tweeter and a really nice controlled top end on the woofers. It’s interesting that the woofer does not have a dust cap—part of the motor extends through the center of the cone. With a less stiff and damped cone material, the high frequency roll-off would look terrible. This woofer.s response is about as good as it gets. Graph 4 shows the woofer’s on-axis and 30-degree off-axis responses together. The roll-off is still smooth and well damped.
The tweeter on- and off-axis response in Graph 5 shows a marked roll-off starting at 10kHz, but this is to be expected from any dome tweeter.inverted or not.
Now that I had a good idea of what the speakers could do, it was time to see what the crossover was about. I ran through the range of settings on the front panel. They include a woofer lowpass switch (changes the woofer x-over frequency) with 10 settings, a Q switch (changes the shape of the response) with eight settings, a highpass switch (changes the tweeter x-over frequency), with seven settings, and a tweeter level switch with eight settings.
Graph 6 above shows the range of lowpass settings on just the woofers and Graph 7 shows the system response with all of the other switches set to 1. Note that the first five settings change the shape of the high-frequency roll-off and the last five settings change the roll-off and the woofer level. The system responses are terrible because the tweeter settings have not been optimized, but you can clearly see the wide range of responses available (Graph 8).
Graph 8 above shows the far more subtle range of Q settings on the woofers response. In the system response (Graph 9) you can see that these settings affect both the roll-off shape and the interaction with the tweeter at the crossover point (the notch at 2,600Hz).
Graph 10 shows range of tweeter highpass settings on the tweeter by itself. The top line in pink is the response of the tweeter without crossover. It is clear that the crossover has an insertion loss of about 3dB. This should not be a problem however because of the tweeter’s very high sensitivity.
The system response is shown in Graph 11 below with the woofer lowpass set to 10 (lowest frequency) and Q to 8 (smoothest response). This wide range of variations illustrates how complex tuning a system would be with all of the available setting options.
Graph 12 illustrates the precise 1dB steps of attenuation over an 8dB range that will let you fine tune the tweeter exactly to the wide range of mounting placements in car systems.
The results of about 30 minutes of tweaking the settings are shown in Graph 13 below. The red line in the center is the best that I could get for an on-axis response. The lines above and below show the results of the two closest highpass settings. This is a very respectable response – +/- 3dB. From 200Hz to 20kHz.
Graph 14 below took about five minutes of tweaking and shows the 30-degree off-axis response. If you ignore the range above 10kHz the response is +/- 1.5dB! This is phenomenal and represents what you can expect in your car. It.s important to note that the tweeter.s response at 20 degrees is almost perfectly flat to 20kHz, so in most systems this response error will not exist.
I was a little concerned about the wide range of crossover frequencies on the tweeter so I decided to really push it at the lowest point to see how much distortion it produced. Graph 15 shows the results of a 100-watt sweep from 1kHz to 40kHz. The harmonic distortion in the range below 10kHz never gets much above 3% and even at the 20kHz is only 5%. To put this in perspective, you ear will be creating more distortion at this listening level and you will be risking long term hearing loss after only a minute or two. This is by far the best distortion results that I have seen from any dome tweeter!
On-Axis Response: 10
Off-Axis Vertical: 10
Off-Axis Horizontal Mount: 10
So what is my final opinion based on the tests? If the woofer didn’t have the small misalignment, the speakers would have scored an almost perfect score. The on-axis response wasn.t as smooth as the off-axis, but it was still better than any other component system I have tested. This is without reservation the best component set I have tested, seen or heard about. So Eric, how do they sound? —Pat Turnmire
Focal has been producing speakers for a long time now. They have always had a very good reputation in the market as a builder of high-quality and great-sounding loudspeakers. When I first saw these beautiful Focal Utopia Beryllium speakers, I thought the packaging is fantastic. The Utopia Be No. 6′s come in an oversized briefcase, with aluminized sides and frame. I immediately called Orca Designs, the importer for the Focal brand. I was in luck too, because I got the big cheese himself, Kimon Bellas, president of Orca Designs, on the phone. He answered a few questions and gave his personal tips for getting the maximum performance out of these beautiful speakers.
Bellas told me that the No. 6′s were designed for the customer who wants a high-end home audio system sound in their car. Of course, one would have to afford the $3,900.00 retail price. Bellas told me that Focal, through their JM Labs brand name, actually makes an ultra high-end set of home audio speakers called the Utopia Be No. 6 that uses the same inverted-dome beryllium design as the car audio versions.
I have used other beryllium diaphragm drivers in the past, such as the Technical Audio Devices 2001 1. compression drivers which have always been extremely impressive in their high-frequency detail and low distortion. I asked Bellas why beryllium is such a big deal in speaker design? He replied that the material has all the qualities that you would want in a diaphragm material. It is extremely stiff, very light and exhibits superior internal damping. Of course, nothing is for free in the world of speaker manufacturing, which is true with beryllium. It is very expensive and extremely hard to successfully form, becaus
e it is brittle and delicate.
While the 6 W2 Be, 6-1/2" woofer does not have the difficulty of being made from beryllium, Focal has done a great job of creating a woofer that should actually fit most cars! The 6 W2 Be is only 2.84. deep. This is achieved mostly by the use of a high-power Neo magnet structure, driving the composite multi-layer cone. It.s nice to see a manufacture keep this important point in mind!
The "Crossblock" (crossover) is fascinating. With no less than four knobs, each with several detents, getting the crossover setting dialed in was the most time consuming part of this test. Even after putting in all the effort that I did, I am not 100% sure that I got the most out of them.
So, where did I end up on the Crossblock for the adjustments? Well, I’m glad you asked! The first knob on the left is called S1 and it has 10 lowpass frequency selections available. Position 1 has the highest frequency passing and really gave the woofer too much signal, while position 10 was nice and smooth, but seemed to leave an under-lap in the response curve. It will be great to see the data that Pat comes up with once he has measured this device. I ended up with the adjustment right in the middle at the #5 position.
The next knob, labeled S2, also affects the shape of the lowpass filter by changing its .Q.. It has eight adjustment detents. Position 1 has the most energy at the crossover frequency and position 8 has the flattest electrical response. I tended to like the flatter electrical responses, so the final position that I did the testing on was 5.
The S3 knob has seven levels of adjustment for the highpass frequency to the tweeter. In position 1, I found the highs to be dull and missing any sense of air, while at position 7, the tweeters are too bright. I liked position 4 and position 5 depending on the music selected.
Finally the S4 knob, adjusts the loudness level for the tweeter. Position 1 has the highest level of output and position 8 has the most attenuation. I found that position 5 was where the N¬∞6 provided me with the smoothest response.
After giving the Utopia Be No. 6′s a break of over 20 hours, I sat down and inserted Diana Krall’s Love Scenes album. The big upright string bass plucks came through with surprising tactile output. I could feel them in the seat of my pants. The overall detail was good on the note changes and frequency shifts. I could also hear the fret and string noises easily.
The vocal quality was a touch "bitey" on attacks, but the vocal imaging was fixed and centered; however, the height seemed low. The piano was a little light in body, which surprised me because the string bass was so full. As with the imaging the sound stage was fixed in size and position, but the room size was unrealistic.
The No. 6′s sounded very nice, but I was a bit disappointed so I decided to try an old trick. I flipped the polarity of the tweeter and gave that a try. Instantly the vocals were better, much smoother. Image height was improved, a sense of ambience became apparent, and the piano thickened. Much better overall for sure.
Picking up with Tracy Chapman’s Heaven’s Here on Earth, I found that the big bass drums impacts were light and that the fundamental frequencies were well attenuated, which would be expected on a 6-1/2" woofer. The acoustic guitar was clear and nicely detailed. The tambourine bangles had good individuality and moderate shimmer, but I would have liked to have heard even more shimmer.
The woodblock in the rhythm section was recessed sounding but "woody" in tonality. The vocal reproduction is sharply focused with good breath detail and very nice realism.
Moving to a full acoustic recording I selected Telarc’s 20-bit recording of Schubert’s Symphony #9, "The Great," to test for a sense of space and tonality. The French horns were very accurate but sounded distant. They did not come through as intimate as on the Alpine F#1′s, but the overall ambience of the No. 6′s was more pronounced. The violins were full, quite beautiful sounding. They were the best part of this playback! The string bass was tight and plucky with the oboe’s coming through silky and reedy.
I changed gears with a move to some male vocal tracks. First up was Garth Brook’s Thunder Road. The thunderclaps were large and distant sounding. They did not put me outside, but definitely gave me a sense of being in a large area. The guitar was crisp and very well detailed. Brook’s vocals sounded really nice. He was closely mic’d and there was no problem with the transients or his level, from soft to loud. The cymbals and drum kit were fixed and again well detailed.
Finally, finishing off with some good ole rock and roll, I popped in ZZ Top’s La Grange. The opening rim taps were crisp and the electric guitar was well shaped. The vocals were fantastic with solid imaging stability. The toms in the drum kit were thin sounding but taut. I would have liked more midbass and bass punch, so adding a subwoofer would be a good idea.
What can I say; Focal has done it again with the Focal Utopia Be No. 6, 2-way speaker system. Space age technology and materials, everything combined to create a top-of-the-line speaker system. If you can afford these, they are worth a listen. The Crossblock, while being very easy to use, can be a bit overwhelming to get set up to its full potential, so you want to find a dealer who hears what you hear and is willing to spend some time setting up your system. —Eric Holdaway
Subjective Score Chart
Utopia Be No. 6
Overall Sound Quality 15 (of 20)
Tonal Balance (above 80Hz) 7 (of 10)
Low-Frequency Extension 7 (of 10)
Clarity at Low Volume 8 (of 10)
Clarity at High Volume 8 (of 10)
Image Stability 8 (of10)
Listening Fatigue (moderate volume) 7 (of 10)
Flexibility/Ease of Installation 16 (of 20)
Total Subjective Score 76 (of 100)